Airlink AML001 - Manual (Page 61)

PCI Modem Card User's Manual
60
+FTH=96 V.29. 9600 bits/s.
+FTH=73 V.17. 7200 bits/s.
+FTH=74 V.17 (short train). 7200 bits/s.
+FTH=97 V.17. 9600 bits/s.
+FTH=98 V.17 (short train). 9600 bits/s.
+FTH=121 V.17. 12000 bits/s.
+FTH=122 V.17 (short train). 12000 bits/s.
+FTH=145 V.17. 14400 bits/s.
+FTH=146 V.17 (short train). 14400 bits/s.
+FTM=<mod>—Transmit FAX Data with <mod> Carrier
+FTM=<mod> command causes the modem to transmit data using the
modulation defined as below.
+FTM=3 V.21 channel 2. 300 bits/s.
+FTM=24 V.27ter. 2400 bits/s.
+FTM=48 V.27ter. 4800 bits/s.
+FTM=72 V.29. 7200 bits/s.
+FTM=96 V.29. 9600 bits/s.
+FTM=73 V.17. 7200 bits/s.
+FTM=74 V.17 (short train). 7200 bits/s.
+FTM=97 V.17. 9600 bits/s.
+FTM=98 V.17 (short train). 9600 bits/s.
+FTM=121 V.17. 12000 bits/s.
+FTM=122 V.17 (short train). 12000 bits/s.
+FTM=145 V.17. 14400 bits/s.
+FTM=146 V.17 (short train). 14400 bits/s.
+FTS=<value>—Transmission Silence
+FTS=<value> causes the modem to terminate a transmission and wait for
<value> x 10 ms before responding with the OK result code. For example,
<value> = 5 results in a 50 ms interval. <value> has a range of 0—255.
A.1.2 FAX Commands
+FAA=<value>—Adaptive Answer
A service class 1 FAX DCE may have the ability to answer as a data modem
DCE or as a FAX DCE. It may also be able to change from class 1 FAX
mode to data modem operation in response to an incoming call.