Before operating the transceiver, Attention – Alinco DR-SR8 User Manual

Page 11

Advertising
background image

9

Attention

• Do not remove the case or touch the interior components.
Tampering can cause equipment trouble.

Do not use or keep the transceiver where it is exposed to direct sunlight, dusty places, or near

sources of heat.
Keep the transceiver away from TV’s or other equipment when it

interferes with reception.
When transmitting for long periods of time at high power, the

transceiver might overheat.
Turn the power off immediately if the transceiver emits smoke or

strange odors. Ensure the transceiver is safe, then bring it to the
nearest Alinco service center.
An operator’s license is required for this device.

Notice to California resident users

The product that comes with this manual is free from dangerous material such as lead and
cadmium as per RoHS order of EU.

The transceiver has no protection against lightning.

The user is responsible for providing adequate protection if he uses the device at home and
installs the antenna outdoor. Be aware that any outdoor antenna creates a direct path for lighting
current (more than 10kA) to the transceiver. This path exists whether the device is turned ON or
OFF.
Any vehicle does not present a safe environment during lightning. This environment becomes
much more dangerous if an outdoor antenna is installed on the car. Move the antenna and its
cable into the car at the fi rst sight of forthcoming thunderstorm and lightning.

Limited Power Source

Please note that the transceiver enclosure only provides mechanical protection for its internal
parts; it will not contain a fi re within the device if the fi re starts under certain fault conditions.
Alinco will not take responsibility for any fi re hazard associated with powering the transceiver
or charging its batteries using a power source that does not belong to the limited power source in
the meaning of EN60950-1.

Before Operating the Transceiver

Advertising