Alinco DR-SR8 - Manual (Page 8)

6
WARNING
Risk of explosion if battery is replaced with an incorrect type.
Dispose of, or recycle used batteries according to your local regulations.
The manufacturer declines any responsibilities against loss of life and property due to a
failure of this product when used with or as a part of a device made by third parties.
Use of third party accessory may result in damage to this product. It will void our
warranty for repair.
„ Handling this product:
Be sure to reduce the audio output level to minimum before using an earphone or a
headset. Excessive audio may damage hearing.
Do not open the unit without permission or instruction from the manufacturer.
Unauthorized modifi cation or repair may result in electric shock, fi re and/or malfunction.
Do not operate this product in a wet place such as shower room. It may result in electric
shock, fi re and/or malfunction.
Do not place the product in a container carrying conductive materials, such as water
or metal in close proximity to the product. A short-circuit to the product may result in
electric shock, fi re and/or malfunction.
Do not touch the heatsink (on/around the unit mostly found on mobile-base units) as it
may become very hot during/after the operation that may risk burn your skin.
„ About power-supply:
Use only appropriate, reliable power supply of correct voltage and capacity.
Do not connect cables in reverse polarity. It may result in electric shock, fi re and/or
malfunction.
Do not plug multiple devices including the power-supply into a single wall outlet. It
may result in overheating and/or fi re.
Do not handle a power-supply with a wet hand. It may result in electric shock.
Securely plug the power-supply to the wall outlet. Insecure installation may result in
short-circuit, electronic shock and/or fi re.
Do not plug the power-supply into the wall socket if the contacts are dirty.
Shortcircuiting and/or overheating may result in fi re, electric shock and/or damage to
the product.
Do not modify or remove fuse-assembly from the DC-cable. It may result in fi re, electric
shock and/or damage to the product.