Alinco DR-SR8 - Manual (Page 7)

5
WARNING
To prevent any hazard during operation of Alinco’s radio product, in this manual and on the product
you may fi nd symbols shown below. Please read and understand the meanings of these symbols before
starting to use the product.
Danger
This symbol is intended to alert the user to an immediate danger that may
cause loss of life and property if the user disregards the warning.
Alert
This symbol is intended to alert the user to a possible hazard that may cause
loss of life and property if the user disregards the warning.
Caution
This symbol is intended to alert the user a possible hazard that may cause loss
of property or injure the user if the warning is disregarded.
Alert symbol. An explanation is given.
Warning symbol. An explanation is given.
Instruction symbol. An explanation is given.
ALERT
„ Environment and condition of use:
Do not drive while handling the radio for your safety. It is recommended that you check
local traffi c regulations regarding the use of radio equipment while driving.
Some countries prohibit the operation of transceiver while driving.
Do not use this product in close proximity to other electronics devices, especially
medical ones. It may cause interference to those devices.
Keep the radio out of the reach of children.
In case a liquid leaks from the product, do not touch it. It may damage your skin.
Rinse with plenty of cold water if the liquid contacted your skin.
Never operate this product in facilities where radio products are prohibited for use such
as aboard aircraft, in airports, in ports, within or near the operating area of business
wireless stations or their relay stations.
Use of this product may be prohibited or illegal outside of your country. Be informed in
advance when you travel.
The manufacturer declines any responsibilities against loss of life and/or property due
to a failure of this product when used to perform important tasks like life-guarding,
surveillance, and rescue.
Do not use multiple radios in very close proximity. It may cause interference and/or
damage to the product(s).