Amer Networks WS6028 Web GUI - Manual (Page 11)

Basic Management Configuration Chapter 1 Web Management
1-4
Input “CMD”, and click the <OK> button. Then input “ping 192.168.1.1” (IP address
for AC) and press the <enter> button. If the output result shows the reply from the AC, it
means that the network is connected. As shown in Fig 1-6 , otherwise please check the
network connection.
Fig 1-6 Dialog box for command lines
1.2 Web Interface Introduction
1.2.1 Login AC Switch
Run the Web browser; use the default IP address of 192.168.1.1 in the address bar,
and press the <Enter> key to enter the login page for AC, as shown in Fig 1-7 . Input the
user name and password (the default user name for the first time: admin, password:
admin), click the <Login> button or press the <Enter> key to enter into the Web
configuration page.