Amer Networks WS6028 Web GUI - Manual (Page 32)

Basic Management Configuration Chapter 6 AP Management
6-3
20MHz, and select the supported radio rates. Click “OK” to submit the configuration. The
created or modified AP group will be seen.
Radio mode: user can select IEEE 802.11b/g/n, IEEE 802.11b/g, 2.4GHz IEEE
802.11n, IEEE802.11b or IEEE 802.11g in radio 1; and user can select IEEE
802.11a/n, IEEE 802.11a or 5GHz IEEE 802.11n in radio 2.
RF scan mode: includes Active and Sentry two modes.
Radio channel bandwidth: according to the different radio modes, there are three
modes of 20MHz, 40MHz and 20/40MHz can be selected.
Auto eligible: shows the channel that can join the auto adjustment.
Rate sets (Mbps): Select the basic and supported rates through the checkboxes.
6.1.4 VAP
The VAP or Virtual Access Point configures the network SSID’s used by all the APs in
a group.
Select the VAP which needs to be enabled and select the network name. Click “edit”
to configure the network and more information can be viewed in chapter 5 networks.
Example: Select the second and third VAP and select the created network name,
and then click “OK”, the AP group will be created or modified successfully.