Amer Networks WS6028 Web GUI - Manual (Page 36)

Basic Management Configuration Chapter 7 Security Authentication
7-1
Chapter 7 Security Authentication
Security authentication module includes radius configuration and LDAP configuration.
The radius configuration includes global configuration, radius authentication server
configuration, radius accounting server configuration, radius group manage and radius
configuration.
7.1 Radius Configuration
7.1.1 Global Configuration
Before using the radius authentication and accounting service, configure an
accounting server and an authentication server first. The server configuration is viewed in
the next section. After configured the accounting and authentication servers, select the
radius authentication status box to enable the radius function; it corresponds to the
command of “aaa enable”. Select the radius accounting status box to enable the radius
accounting function; it corresponds to the command of “aaa-accounting enable”.
Configure the key in the radius key box and it corresponds to the command of
“radius-server key”. The key must be the same as the one of the radius server for
authentication. Configure the address which is used alternately between AC and radius in
the radius NAS IPV4 and radius source IPV4 boxes. The configuration of NAS IP
corresponds to the command of “radius nas-ipv4” and the radius source IPV4
corresponds to the command of “radius source-ipv4”.
Example: Enable the radius authentication and accounting server and configure the
radius key as test. The NAS IPV4 and source IPV4 are both 10.0.0.250:
After configured, click “submit” to same the configuration.