Amer Networks WS6028 Web GUI - Manual (Page 91)

Basic Management Configuration Chapter 19 Management
19-5
3. Reboot with the default configuration—click “apply” to clear all the current
configurations in the switch and restart the switch.
19.2 SNMP Configuration
Click management->SNMP configuration to configure the SNMP function. Notice:
enable the SNMP function first before you configure it.
19.2.1 SNMP Authentication
Click management->SNMP configuration->SNMP authentication to configure the
SNMPv3 options, including users, groups, views and SNMP engine id configuration as
below:
19.2.1.1 Users
Click management->SNMP configuration->SNMP authentication->users to add or
delete the SNMPv3 users.
SNMP username—the user name, it includes 1 to 32 characters.
SNMP group—the group name that the user belongs too.