Grass Valley Aurora Edit LD v.6.3 - Manual (Page 57)

September 14, 2007 Aurora Edit LD User Guide 57
Copying and Pasting Clips
Copying and Pasting Clips
In the Timeline, you can copy and paste items, such as video clips, audio clips, and
transitions.
Using the right-click menu in the Timeline, you can delete, lift, copy, cut and paste
selected items, a selected area of the sequence, or paste a selected track.
Selected Items in the Timeline
1. Click once on the clip (or Lasso the area) in the Timeline you want to cut or copy.
An outline appears around the clip you selected.
2. Right-click in the Timeline and select what you want to do.
3. If you are pasting a clip, move the cursor to the new location, right-click and select
Paste Selected or Paste Track .
You can also use keyboard shortcuts for cutting and pasting:
You can also paste items into other sequences.
Selected Area of the Timeline
1. Mark an In Point at the start of the material to move.
2. Mark an Out Point at the end of the material.
3. Turn off any tracks you don’t want to cut or copy.
4. Right-click in a track and select one of these functions: Cut Area , Copy Area , Delete
Area , or Lift Area .
5. If desired, paste the material into another part of this sequence or another sequence.
Make sure you remove any mark points from your sequence before pasting material;
Aurora Edit LD pastes material at the Mark Out Point.
Ctrl + X Cuts a selected item.
Ctrl + C Copies a selected item.
Ctrl + Y Pastes a selected item.