Grass Valley Aurora Edit LD v.6.3 - Manual (Page 94)

94 Aurora Edit LD User Guide September 14, 2007
Chapter 9 Saving and Sending Clips
Restoring Partial Clips
To restore a partial clip:
1. From the Find tab, search for the clip you wish to restore.
2. Click the mgmt (Management)tab.
3. Click Partial Restore From Archive to set the restore parameters.
4. Select the Region to Restore by playing the clip and creating mark points.
5. Select a Restore To Location destination for the high-resolution material on your
Open SAN or NewsShare NAS. If you restore a partial clip, you should save it to
a location that is monitored for scavenge operations so that a complete set of proxy
assets is generated for the partial restore file.
6. If required, edit the clip name in the Restore Asset As field. The system appends
"_PR" to the restore clip name to identify it as a partial clip.
7. To automatically rename the clip if there is a naming conflict, check the enable
duplicate name handling checkbox. If you leave the box unchecked, you will be
prompted to rename the clip if there is a conflict.
8. Click Submit .
9. Click Yes to confirm the archive operation.
10. Click OK to close the Restore Assets box or click View Log to view which assets
were submitted.
Once restored, the Online Media entry on the Related tab shows the name and location
of the clip on the Open SAN or NewsShare NAS. The Archived Media entry displays
the location of the archived clip; clips remain archived until you choose Delete From
Archive from the
mgmt (Management) tab.