Emerson Liqui-tect MC68HC16Z1 - Manual (Page 41)

System and Control Options
37
6.9 Reset Latched Alarms
The Reset Latched Alarms menu allows you to clear any leak or fault
alarms that have been defined as latched.
To clear latched alarms:
Log In and Choose Reset Latched Alarm
• From the Main Menu, use the arrows ↑↓ to choose System and
Control, then press Enter ↵ (see 6.1 - Login for help) .
• Enter your password at the Login screen.
• From the System and Control Menu, use the arrows
↑↓ to choose
Reset Latched Alarm, then press Enter ↵ .
Choose Y to Reset Alarms
• From the Reset Latched Alarms Menu, use the arrows ↑↓ to
choose Y (Yes - reset all latched alarms) or N (No - do not reset
alarms).
(If no alarms have been set up as latched, the screen displays a
message, as shown below right.)
• Press Enter ↵ .
This is the only way to reset latched alarms. This step is required to
return latched points to their normal state. (To set up digital alarm
outputs as latched, see 6.5.3 - Define Alarms as Latched or
Unlatched.)
Main Menu
VIEW STATUS
> SYSTEM AND CONTROL
↑↓
=NEXT
↵
=SELECT
Login
LOGIN
AAAA
↑↓
=SELECT
↵
=NEXT/END
System & Control Menu
SETUP SYSTEM
> RESET LATCHED ALARM
CLEAR ALARM HISTORY
↑↓
=NEXT
↵
=SELECT
CLEAR ZONE TREND
Reset Latched Alarms
RESET LEAK & FAULT
LATCHED ALARMS? Y
↑↓
=Y/N
↵
=END
Message if No Latched
Alarms
ALARMS ARE NOT SET
FOR LATCHING
ESC=EXIT