Specification, Installing a cd-rom drive, Confidential – Epson SR-600 User Manual
Page 121
Advertising
Rev.A
Peripherals/Option Installation 6-15
Developer's Guide SR-600
Confidential
Specification
❏ General Specification
Interface:
ATAPI(Primary)
Media Size:
12cm or 8cm
Power Supply:
+5V Single
Environmental Specification :Based on the SR-600 environmental specification
❏ Dimensions and Weight
Dimensions(width) x (length) x (height):128mm x 127mm x 12.7mm
Weight:
245g
Installing a CD-ROM Drive
Follow the steps below to install the CD-ROM Drive.
1. Remove two screw on the lower right and left corner of the unit’s rear side.
2. Hold the tab on the lower right and left corner of the unit and remove the main cover by
sliding downward.
Advertising