Epson SR-600 - Manual (Page 7)

Rev.A v
Developer's Guide SR-600 Confidential
Safety Precautions
This section presents important information intended to ensure safe and effective use of this
product. Please read this section carefully and store it in an accessible location.
WARNING:
❏ Turn off the main power switch immediately and unplug the power cord if the SR-600
produces smoke, a strange odor, or unusual noise . Continued use may lead to fire or
electric shock. Contact your dealer or an EPSON service center for advice.
❏ Never attempt to repair this product yourself. Improper repair work can be
dangerous.
❏
Never disassemble or modify this product. Tampering with this product may result in
injury, fire, or electric shock.
❏
Be sure to use the specified power supply. Using an unsuitable power supply may
cause fire or electric shock.
❏ Never insert or disconnect the power plug with wet hands. Doing so may result in
severe shock.
❏ Do not allow foreign objects to fall into this product. Penetration by foreign objects
may lead to fire or shock.
❏ Do not plug too many leads into a single socket. It may lead to fire.
❏ Handle the power cord with care. Improper handling may lead to fire or shock.
❏ Do not modify or attempt to repair the cord.
• Do not process the power cord.
• Do not place any object on top of the cord.
• Avoid excessive bending, twisting, and pulling.
• Do not place the cord near heating equipment.
• Check that the plug is clean before plugging it in.
• Be sure to push the prongs all the way in.