Epson SR-600 - Manual (Page 96)

5-14 Hardware Specifications Rev.A
Confidential
Multi Video Mode
Peripheral Video Circuits
5-10 Block chart of the peripheral video circuits
The video controller uses the Intel (formerly Chips & Technology) (B) 69000.
It is connected to the PCI bus.
When the Windows 98/Windows 2000 operation system is used, it is also possible to support
Multi Display by generating the output from LCD (or CRT) and video card. Insert video card
into the PCI slot to use the Multi Display. However, the LCD and CRT cannot display different
screen images if only the SR-600 is in use.
2MB SDRAM is built in the system as a video memory which makes possible the color settings
shown in the table below.
Note 1) The above table shows the colors that can be set. The number of colors that can actually be displayed is
restricted by the available display colors for each LCD unit.
Table 5-4 Display devices and the available color settings
Resolutions(dots)
Display device
DSTN TFT CRT
640 x 480 - - 16,670,000 colors
800 x 600 16,670,000 colors 256K colors 16,670,000 colors
1024 x 768 - - 65,000 colors
Video Controller
B69000
SDRAM
(2MB)
14.318MHz
Clock
32.768kHz
Clock
PCI Bus
LCD Signal
CRT Signal
LC
D
M
o
du
le
C
o
nne
c
te
r
Mai
n
B
o
a
rd
C
o
n
n
e
c
te
r