Epson SR-600 - Manual (Page 152)

6-46 Peripherals/Option Installation Rev.A
Confidential
DIMM
Descriptions
Two 168pin DIMM Socket is provided and the maximum of 256MB Memory can be mounted.
DRAM only supports 3.3V SDRAM(Synchronous DRAM). DIMM can be used singulary, and
also two DIMMs with different capacity can be inserted to use. The basic specification must
compliant with Intel PC SDRAM Unbuffered DIMM Specification.
Basic Specification
SDRAM Specificat:ion: Compliant with Intel PC SDRAM Specification
Operation Clock: 66MHz 4/Socket
(Input from Chipset via Clock buffer)
PC100 compliant (for 100MHz clock)DIMM can be used.
Required Height:Under 36mm (Maximum 38.23mm under Unbuffered DIMM Specification)
Serial PD (SPD) : Must compliant with Intel PC SPD Specification
(Memory information acquisition)
Operation Mode: Compliant with Self-reflsh mode
Supplied Items
Check that the itms shown in the table belwo is contained and none of the supplies are
damaged.
6-12 Supplied Itmes with DIMM
CAUTION:
Use it within the specification standard. Never use is in the high temperature and
humidity, and avoid the condensation.If this product is not used within the specification
standard, it may result in the shorten its life and the damege of the product.
DIMM
User’s Manual