Epson S5U1C63000A - Manual (Page 131)

CHAPTER 7: DISASSEMBLER
S5U1C63000A MANUAL EPSON 117
(S1C63 FAMILY ASSEMBLER PACKAGE)
7.6 Error/Warning Messages
7.6.1 Errors
When an error occurs, the disassembler immediately terminates the processing after displaying an error
message. It will not output a source file.
The disassembler error messages are given below.
Error message Description
Cannot create <file kind> file <FILE NAME> The file cannot be created.
Cannot open <file kind> file <FILE NAME> The file cannot be opened.
Cannot read <file kind> file <FILE NAME> The file cannot be read.
Cannot write <file kind> file <FILE NAME> Data cannot be written to the file.
Illegal file name <FILE NAME> specified with The specified output source file name is incorrect.
option <option>
Illegal file name <FILE NAME> The specified input file name is incorrect.
Illegal HEX data format The input file is not a Motorola-S format file.
Illegal option <option> An illegal option is specified.
Out of memory Cannot secure memory space.
7.6.2 Warning
Even if a warning is issued, the disassembler keeps on processing, and completes the processing after
displaying a warning message, unless, in addition, an error is produced.
Warning message Description
Input file name extension .XXX conflict Two or more file names with the same extension have been
specified. The last one is used.
Cannot open Hex file xxx.csa The file cannot be opened. It is assumed there is no data
memory.