Epson S5U1C63000A - Manual (Page 156)

CHAPTER 8: DEBUGGER
142 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
8.8.2 Source Display and Symbolic Debugging Function
The debugger allows program debugging while displaying the assembly source statements. Address
specification using a symbol name is also possible.
Displaying program code
The [Source] window displays the program in the specified display mode. The display mode can be
selected from among the three modes: Unassemble mode, Source mode, Mix mode.
Table 8.8.2.1 Commands/tool bar buttons to switch display mode
Display mode Command Menu Button
Unassemble u [View | Program | Unassemble]
Source sc [View | Program | Source Display]
Mix m [View | Program | Mix Mode]
(1) Unassemble mode
In this mode, the debugger displays the program codes after unassembling into mnemonics.
(2) Source mode
In this mode, the source that contains the code at the current PC address is displayed like an editor
screen. This mode is available only when an absolute object file that contains source debugging
information has been loaded.