Epson S5U1C63000A - Manual (Page 298)

CHAPTER 12: MASK DATA CHECKER
284 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
12.3.3 Operation Procedure
The following shows the basic operation procedure.
(1) Loading the Device information definition file
First, select a device information definition file (s1c63xxx.ini) and load it.
Select [Device INI Select] from the [Tool] menu or click the [Device INI Select] button.
[Device INI Select] button
The dialog box shown below appears. Enter a file name including the path in the text box or select a
file by clicking the [Ref] button.
Click [OK], and the file is loaded. If the specified
file exists and there is no problem with its
contents, the set-up items in winmdc are initial-
ized with the loaded device information.
To stop loading the file, click [Cancel].
Once a device information definition file is selected, the same file is automatically loaded the next
time you start winmdc.
(2) Packing
1. Select [Pack] from the [Tool] menu or click the [Pack] button on the tool bar to bring up the [Pack]
dialog box.
[Pack] button