Epson S5U1C63000A - Manual (Page 197)

CHAPTER 8: DEBUGGER
S5U1C63000A MANUAL EPSON 183
(S1C63 FAMILY ASSEMBLER PACKAGE)
8.9.8 CPU Reset
rst
(reset CPU)
Function
This command resets the CPU.
Format
>rst
↵
(direct input mode)
Notes
• The registers and flags are set as follows:
PC: 0110
A: A
B: A
X: AAAA
Y: AAAA
EICZ: 0000
SP1: AA
SP2: AA
EXT: AA
QUEUE: AAAA
• The execution cycle counter is cleared to 0.
• If the [Source] window is open, the window is redisplayed beginning with address 0x0110. If the
[Register] window is open, the window is redisplayed with the above contents.
• The debug status, such as memory contents, breaks, and trace, is not reset.
GUI utility
[Run | Reset CPU] menu item, [Reset] button
When this menu item or button is selected, the rst command is executed.
[Reset] button