Epson S5U1C63000A - Manual (Page 155)

CHAPTER 8: DEBUGGER
S5U1C63000A MANUAL EPSON 141
(S1C63 FAMILY ASSEMBLER PACKAGE)
8.8 Debug Functions
This section outlines the debug features of the debugger, classified by function.
Refer to Section 8.9, "Command Reference" for details about each debug command.
8.8.1 Loading Program and Data Files
Loading files
The debugger can read a file in IEEE-695 format or Motorola-S format in the debugging process.
Table 8.8.1.1 lists the files that can be read by the debugger and the load commands.
Table 8.8.1.1 Files and load commands
File type Data type Ext. Generation tool Com. Menu Button
IEEE-695 Program/data .abs Linker lf [File | Load File...]
Motorola-S Program (5 high-order bits) .hsa HEX convertor lo [File | Load Option...]
Program (8 low-order bits) .lsa HEX convertor
Function option .fsa Function option generator
Segment option .ssa Segment option generator
Melody data .msa Melody assembler
(Ext. = Extension, Com. = Command)
Debugging a program with source display
To debug a program using the source display and symbols, the object file must be in IEEE-695 format
read into the debugger. If any other program file is read, only the unassemble display is produced.