Epson S5U1C63000A - Manual (Page 148)

CHAPTER 8: DEBUGGER
134 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
[Command File...]
This menu item reads a command file and executes the debug commands written
in that file. It performs the same function when the com or cmw command is
executed.
[Reset CPU]
This menu item resets the CPU. It performs the same function when the rst com-
mand is executed.
8.6.4 [Break] Menu
[Breakpoint Set...]
This menu item displays, sets or clears PC breakpoints using a dialog box. It
performs the same function as executing the bp command.
[Data Break...]
This menu item displays, sets or clears data break conditions using a dialog box. It
performs the same function as executing the bd command.
[Register Break...]
This menu item displays, sets or clears register break conditions using a dialog
box. It performs the same function as executing the br command.
[Sequential Break...]
This menu item displays, sets or clears sequential break conditions using a dialog
box. It performs the same function as executing the bs command.
[Stack Break...]
This menu item displays or sets stack break conditions using a dialog box. It
performs the same function as executing the bsp command.
[Break List]
This menu item displays the all break conditions that have been set. It performs the
same function as executing the bl command.
[Break All Clear]
This menu item clears all break conditions. It performs the same function as
executing the bac command.
8.6.5 [Trace] Menu
[Trace Mode Set...]
This menu item sets a trace mode and trace conditions using a dialog box. It
performs the same function as executing the tm command.
[Trace Search...]
This menu item searches trace information from the trace memory under the
condition specified using a dialog box. It performs the same function as executing
the ts command.
[Trace File...]
This menu item saves the specified range of the trace information displayed in the
[Trace] window to a file. It performs the same function as executing the tf com-
mand.