Epson S5U1C63000A - Manual (Page 277)

CHAPTER 11: MELODY ASSEMBLER
S5U1C63000A MANUAL EPSON 263
(S1C63 FAMILY ASSEMBLER PACKAGE)
11.3 Using winmla
11.3.1 Starting Up
Startup from Explorer
Double-click on the winmla.exe icon or select winmla from the start menu.
If the device information definition file (s1c63xxx.ini) was loaded into your computer
during previous execution, winmla automatically reads the same file as it starts.
Alternatively, drag the Device information definition file icon into the winmla.exe icon to
start winmla, which will then read the Device information definition file.
Startup by command input
You can also start winmla from the MS-DOS prompt by entering the command shown below.
>winmla [s1c63xxx.ini]
denotes entering the return key.
You can specify the device information definition file (s1c63xxx.ini) as a command option. (You can
also specify a path.) When you specify the device information definition file here, winmla reads it as
it starts. This specification can be omitted.
When winmla starts, it displays the [MLA] window. The following diagrams show a [MLA] window
when the device information definition file has been loaded and when it has not.
[MLA] Window (initial screen)
[MLA] Window (after reading the device information definition file)