Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 230)

Installing the Optional Paper Cassette Units
You can install up to 2 paper cassette units.
!
Caution:
❏ Make sure you turn off the printer, unplug the power cord from the printer, and disconnect any cables before
starting installation. Otherwise, the power cord may be damaged resulting in fire or electric shock.
❏ When lifting the printer, place your hands in the positions shown below. If you lift the printer holding other
positions, the printer may fall or you may trap your fingers when placing the printer.
c
Important:
If you are using the optional cabinet, install it under the bottom of the paper cassette unit in advance.
1. Turn off the printer by pressing the P button, and then unplug the power cord.
2. Disconnect any connected cables.
Note:
If other optional paper cassette units have been installed, uninstall them as well.
3. Remove the optional paper cassette unit from its box, and then remove any protective materials.
4. Check the items supplied.
5. Place the optional paper cassette unit where you want to set up the printer.
User's Guide
Appendix
230