Precision Digital PD6000 - Manual (Page 6)

Model PD6000 Analog Input Process Meter Instruction Manual
6
Table of Figures
Figure 1. 1/8 DIN Panel Cutout Dimensions ..................................... 15
Figure 2. Panel Mounting Details ...................................................... 16
Figure 3. Jumper Configuration for 12/24 VDC Power .................... 16
Figure 4. Transmitter Supply Voltage Selection .............................. 17
Figure 5. Connector Labeling for Fully Loaded PD6000 ................. 18
Figure 6. Power Connections ............................................................ 18
Figure 7. Transmitters Powered by Internal Supply ........................ 19
Figure 8. Transmitter Powered by Ext. Supply or Self-Powered .... 19
Figure 9. Voltage Input Connections ................................................ 20
Figure 10. Relay Connections ........................................................... 20
Figure 11. AC and DC Loads Protection ........................................... 21
Figure 12. Low Voltage DC Loads Protection .................................. 21
Figure 13. 4-20 mA Output Connections .......................................... 22
Figure 14. Expansion Modules & DIN Rail Mounting Kit ................. 23
Figure 15. External Relays Module Connections ............................. 23
Figure 16. Digital I/O Module Connections ....................................... 24
Figure 17. Interlock Connections ...................................................... 24
Figure 18. Acknowledge Relays w/Function Key or Digital Input .. 58
Figure 19. Meter Copy Connection ................................................... 79
Figure 20. Meter Dimensions - Side View ......................................... 95
Figure 21. Meter Dimensions - Top View .......................................... 95
INTRODUCTION
The P RO V U
®
PD6000 is a multipurpose, easy to use digital process meter ideal for
level, flow rate, temperature, or pressure transmitter applications. It accepts current
and voltage signals (e.g. 4-20 mA, 0-10 V). Three of the front panel buttons can be
custom-programmed for a specific operation. The analog input can be scaled to dis-
play the process in two different scales; for example the main display could indicate
level in feet and the second display could indicate the volume in gallons.
The basic model includes an isolated 24 VDC transmitter power supply that can be
used to power the input transmitter or other devices. An additional isolated 24 VDC
power supply is included with the 4-20 mA output option.
A fully loaded PD6000 meter has the following: four SPDT relays, 4-20 mA output, and
two 24 VDC power supplies. The PD6000 capabilities may be enhanced by adding the
following external expansion modules: four SPST relays –creating an eight-relay process
meter–, two digital I/O modules with four inputs and four outputs each, and RS-232 or
RS-485 communication adapters.
The eight relays can be used for alarm indication or process control applications, such as
pump alternation control. The 4-20 mA isolated output, Modbus RTU serial communica-
tions, and digital I/O options make the PD6000 an excellent addition to any system.