Precision Digital PD6000 - Manual (Page 85)

Model PD6000 Analog Input Process Meter Instruction Manual
85
Factory Defaults & User Settings
The following table shows the factory setting for most of the programm-
able parameters on the meter. Next to the factory setting, the user may
record the new setting for the particular application.
Model: ______________
S/N: _______________ Date: _________
Parameter Display Default Setting User Setting
Input type input 4-20 mA
Level feature Level No (Single scale)
Filter filter 70
Bypass bypass 0.2
Function Functn Linear
Number of points No Pts 2
Programming prog Scale
Input 1 InP 1 4.000 mA
Display 1 Dis 1 4.000
Input 2 InP 2 20.000 mA
Display 2 Dis 2 20.000
Decimal point
dd.ddd
3 places
Cutoff value CutofF 0.000 (disabled)
Display assignment Dsplay
Big display (Main) big PV: Process variable
Little display (Small) Little Eng units: mA
Display intensity d-Inty 6
Relay 1 action Act 1 Automatic
Relay 1 set point Set 1 1.000
Relay 1 reset point RSt 1 0.500
Relay 2 action Act 2 Automatic
Relay 2 set point Set 2 2.000
Relay 2 reset point RSt 2 1.500
Relay 3 action Act 3 Automatic
Relay 3 set point Set 3 3.000