Precision Digital PD6000 - Manual (Page 68)

Model PD6000 Analog Input Process Meter Instruction Manual
68
Display Parameter Action/Setting
O-rang Overrange Program mA output for display overrange
u-rang Underrange Program mA output for display underrange
mAx Maximum Program maximum mA output allowed
min Minimum Program minimum mA output allowed
Calib Calibrate Calibrate 4-20 mA output (internal refer-
ence source used for scaling the output)
4 mA
4 mA output Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
20 mA 20 mA output Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
user User I/O Assign function keys and digital I/O
F1 F1 function key Assign F1 function key
F2 F2 function key Assign F2 function key
F3 F3 function key Assign F3 function key
dI I Digital input 1 Assign digital input 1 – 8, if expansion
modules are connected
dO 1
Digital output 1 Assign digital output 1 – 8, if expansion
modules are connected
ICal
Internal source
calibration Enter internal source calibration (used for
scaling the meter without a signal source)
C CAL Current
calibration Calibrate 4-20 mA current input (internal
reference source used for scaling the input)
C lo
Current low Calibrate low current input (e.g. 4 mA)
C Hi Current high Calibrate high current input (e.g. 20 mA)
v CAL Voltage
calibration Calibrate voltage input
v Lo
Voltage low Calibrate low voltage input (e.g. 0 V)
v Hi
Voltage high Calibrate high voltage input (e.g. 10 V)
Copy
Copy Enter copy function
send
Send Send meter settings to another meter
done
Done Copy function completed
Diag Diagnostics Display parameter settings