Precision Digital PD6310 - Manual (Page 70)

Model PD6210 & PD6310 Batch Controllers Instruction Manual
70
Advanced Features Menu & Display Messages
The following table shows the functions and messages of the Advanced
Features
menu in the order they appear in the menu.
Display Parameter Action/Setting
filtr Filter Set noise filter value
bypASs Bypass Set filter bypass value
seriAl Serial Set serial communication parameters
SlaveId Slave ID Set slave ID or controller address
baud Baud rate Select baud rate
Tr dLY Transmit delay Set transmit delay for serial communication
Parity Parity Select parity
Even, Odd, or None with 1 or 2 stop bits
t-byt Time byte Set byte-to-byte timeout
SelEct Select Enter the Select menu (function, cutoff, out)
Functn Signal Input
Conditioning Select linear, square root, or programmable
exponent
Linear Linear Set controller for linear function and select
number of linearization points
No PtS Number of
points Set controller for 2 to 32-point linearization
Square Square root Set controller for square root extraction
Prog E Programmable
exponent Set controller for programmable exponent
and enter exponent value
CutofF Cutoff Set low-flow cutoff
Count Count Set the totals to count up or down from a
set value
Tot C Total count Set the batch to count up to or down from
the preset
Gtot C Grand total
count Set the grand total to count up or down
from a defined value
C strt Count start Set the starting grand total value when
counting down
AoutPr Analog output
programming Program analog output parameters
Source Source Select source for the 4-20 mA output