RIGOL DS1000D - Manual (Page 25)

Command Systems RIGOL
Programming Guide for DS1000E, DS1000D Series
2-13
:DISPlay:MNUStaus?
Function Explanation:
The commands set and query the state of the operation menu.
Returned Format:
The query returns ON or OFF.
Example:
:DISP:MNUS ON Open menu for current operation.
:DISP:MNUS?
The query returns ON
6. :DISPlay:CLEar
Command Format:
:DISPlay:CLEar
Function Explanation:
The command clears out of date waveforms on the screen during waveform
persist.
7. :DISPlay:BRIGhtness
Command Format:
:DISPlay:BRIGhtness <ncount>
:DISPlay:BRIGhtness?
Function Explanation:
The commands set and query the brightness of the grid. The range of <ncount>
is from 0 to 32 (from dark to bright).
Returned Format:
The query returns the setting value of <ncount>.
Example:
:DISP:BRIG 10 Setup the grid brightness as 10.
:DISP:BRIG?
The query returns 10.