RIGOL DS1000D - Manual (Page 77)

Command Systems RIGOL
Programming Guide for DS1000E, DS1000D Series
2-65
Function Explanation:
The command queries the positive pulse width of the waveform under measure.
<source> could be CHANnel1 or CHANnel2.
Returned Format:
Such as: 5.00e-04, the unit is s.
17. :MEASure:NWIDth?
Command Format:
:MEASure:NWIDth? [<source>]
Function Explanation:
The command queries the negative pulse width of the waveform under measure.
<source> could be CHANnel1 or CHANnel2.
Returned Format:
Such as: 5.00e-04, the unit is s.
18. :MEASure:PDUTycycle?
Command Format:
:MEASure:PDUTycycle? [<source>]
Function Explanation:
The command queries the positive duty cycle of the waveform under measure.
<source> could be CHANnel1 or CHANnel2.
Returned Format:
Such as: 5.00e-01.
19. :MEASure:NDUTycycle?
Command Format:
:MEASure:NDUTycycle? [<source>]