RIGOL DS1000D - Manual (Page 75)

Command Systems RIGOL
Programming Guide for DS1000E, DS1000D Series
2-63
Function Explanation:
The command queries the overshoot of the waveform under measure.
<source> could be CHANnel1 or CHANnel2.
Returned Format:
Such as: 1.74e-02.
11. :MEASure:PREShoot?
Command Format:
:MEASure:PREShoot? [<source>]
Function Explanation:
The command queries the preshoot of the waveform under measure. <source>
could be CHANnel1 or CHANnel2.
Returned Format:
Such as: 0.00e+00.
12. :MEASure:FREQuency?
Command Format:
:MEASure:FREQuency? [<source>]
Function Explanation:
The command queries the frequency of the waveform under measure.
<source> could be CHANnel1 or CHANnel2.
Returned Format:
Such as: 1.00e+03, the unit is Hz.
13. :MEASure:RISetime?
Command Format:
:MEASure:RISetime? [<source>]