RIGOL DS1000D - Manual (Page 42)

RIGOL Command Systems
Programming Guide for DS1000E, DS1000D Series 2-30
3. :TRIGger:VIDEO:STANdard
Command Format:
:TRIGger:VIDEO:STANdard {NTSC|PALSecam}
:TRIGger:VIDEO:STANdard?
Function Explanation:
The commands set and query the type of video trigger standard.
Returned Format:
The query returns NTSC or PAL/SECAM.
Example:
:TRIG:VIDEO:STAN PALS Setup the video standard as PALSecam.
:TRIG:VIDEO:STAN?
The query returns PAL/SECAM.
4. :TRIGger:VIDEO:LINE
Command Format:
:TRIGger:VIDEO:LINE <value>
:TRIGger:VIDEO:LINE?
Function Explanation:
The commands set and query the number of specified line of synchronous. In
NTSC standard, the range of <value> is 1~525; in PAL/SECAM standard, the
range of <value> is 1~625.
Returned Format:
The query returns the numbers of current line.
Example:
:TRIG:VIDEO:LINE 25 Setup the number of specified line as 25.
:TRIG:VIDEO:LINE?
The query returns 25.
5. :TRIGger:VIDEO:SENSitivity
Command Format: