Key:lock, Key:run, Key:auto – RIGOL DS1000D User Manual
Page 90: Key:channel1
Programming Guide for DS1000E, DS1000D Series
2-76
1. :KEY:LOCK
Command Format:
:KEY:LOCK {ENABle|DISable}
:KEY:LOCK?
Function Explanation:
This command is used to enable/disable the buttons function on the front panel
(except for “Force”).
Returned Format:
The query returns ENABLE or DISABLE.
Example:
:KEY:LOCK ENAB Enable the buttons on the front panel
:KEY:LOCK?
The query returns ENABLE.
2. :KEY:RUN
Command Format:
:KEY:RUN
Function Explanation:
The command controls the operating mode of the oscilloscope. The running
state will switch between ON and OFF if send this command continuously.
3. :KEY:AUTO
Command Format:
:KEY:AUTO
Function Explanation:
The command sets every control values of the oscilloscope automatically in
order to output appropriate waveforms for better observation.
4. :KEY:CHANnel1