Pattern trigger, Pattern trigger -36, Trigger:pattern:pattern – RIGOL DS1000D User Manual
Page 48
Programming Guide for DS1000E, DS1000D Series
2-36
PATTern Trigger
1. :TRIGger:PATTern:PATTern
Command Format:
:TRIGger:PATTern:PATTern <value>,<mask>, [<edge source>,<edge>]
:TRIGger:PATTern:PATTern?
Function Explanation:
The commands set and query the type of pattern for digital signal. Thereinto,
When <value> is a 16-bit integer without sign, high is 1, and low is o;
When <mask> is an 16-bit integer without sign, enable is 1, and X is 0；
The range of <edge source> is 0~15 (DIG0~DIG15);
<edge> is 1 at rising edge and 0 at falling edge, separately.
Returned Format:
The query returns the setting value of <value>, <mask>, <edge source> and
<edge> in turns. Thereinto, the value returned by <value> and <mask> is a
decimal data.
Example:
:TRIG:PATT:PATT 65535,65535,2,1 Setup the type of pattern.
:TRIG:PATT:PATT? The query returns 65535, 65535, DIG2,
Positive.