ProSoft Technology RLX-IFH24S-A - Manual (Page 14)

Guide to the RLX-IFHS User Manual RLX-IFHS ♦ RadioLinx Industrial Wireless
User Manual RadioLinx® Industrial Frequency Hopping Serial Radios
Page 14 of 107 ProSoft Technology, Inc.
November 19, 2013
1.1 About the RadioLinx Industrial Frequency Hopping Radios
1.1.1 Product Specifications - RLX-IFH9S
The RLX-IFH9S provides powerful and secure wireless serial communications
and is well suited for demanding, long-range (up to 30+ miles) SCADA and other
serial applications in tough environments. Operating in the license-free 900 MHz
band, the RLX-IFH9S penetrates foliage and walls / ceilings better than higher
frequency radios. With both RS-232 and RS-485 serial ports, serial protocols
such as Modbus RTU, DF1, ASCII and DNP3 are supported. The RLX-IFH9S is
user configurable as a master, repeater and remote radio and employs the 128
bit AES encryption algorithm approved by the United States government for top
secret information.
RLX-IFH9S radios are quickly and easily configured using the included, graphical
ControlScape software. An OPC server software is also included and allows
users to monitor radio network health with any OPC client based HMI software.
General Specifications
Radio
Frequency 902MHz to 928MHz
Security 128 bit AES encryption
Network Topology Point-to-point, point-to-multipoint, store and
forward repeater
Error Detection 32 bit CRC, ARQ (Automatic Resend Query)
Radio Type Frequency Hopping Spread Spectrum
Transmit Power (Programmable) 100 mW to 1 W
20 dBm to 30 dBm
Channel data rates
(Programmable) 230, 172, 115 or 19.2 kbps
Receiver Sensitivity (Typical) 230 kbps: -106 dBm @ 10-6 BER
172 kbps: -108 dBm @ 10-6 BER
19.2 kbps: -116 dBm @ 10-6 BER
Outdoor Range 30+ miles pt-pt with high gain directional
antennas and RF line-of-sight