ProSoft Technology RLX-IFH24S-A - Manual (Page 63)

RLX-IFHS ♦ RadioLinx Industrial Wireless Guide to the RLX-IFHS User Manual
RadioLinx® Industrial Frequency Hopping Serial Radios User Manual
ProSoft Technology, Inc. Page 63 of 107
November 19, 2013
3.3.1 Change a Network's Channel
For Transparent, Dialup Modem Emulation and Ethernet Protocols, from the
Graphical Layout Screen of an existing network, select:
 Properties
o Radio Network
The Networks Properties dialog box will then display.
Important: The items on this dialog box depend on what type of radio you select. The following
example shows a network of RadioLinx IFHS (Industrial Frequency Hopping Serial) radios. Refer to
the user manual for your radio for an explanation of each configuration item.
Select an unused Network Channel from the drop-down list.
Refer to the user manual for your radio for an explanation of other configuration
items on this dialog box.
Note: Some fields are "grayed-out" in this dialog box because these parameters cannot be
changed from here.
Note: See When to Re-Configure Radios (page 42) to ensure all radios will be updated.