ProSoft Technology RLX-IFH24S-A - Manual (Page 43)

RLX-IFHS ♦ RadioLinx Industrial Wireless Guide to the RLX-IFHS User Manual
RadioLinx® Industrial Frequency Hopping Serial Radios User Manual
ProSoft Technology, Inc. Page 43 of 107
November 19, 2013
Reconfiguring a Remote Radio
To reconfigure the Remote radio(s), click the Configure Radio button on the
Radio Configuration dialog box.
Important: The first time you configure a remote radio, you must connect directly to the radio with
a serial cable to transfer the configuration, because the configuration includes information the radio
requires in order to function as part of the network. After you have configured the remote radio for
the first time, you can disconnect the cable, install the radio in its permanent location, and
reconfigure it over the air through the Master radio.
ControlScape FH will prompt you to choose the location of radio to configure.
Repeat these steps for each Remote radio on your network.