ProSoft Technology RLX-IFH24S-A - Manual (Page 61)

RLX-IFHS ♦ RadioLinx Industrial Wireless Guide to the RLX-IFHS User Manual
RadioLinx® Industrial Frequency Hopping Serial Radios User Manual
ProSoft Technology, Inc. Page 61 of 107
November 19, 2013
3.2 LED Indicators
The RLX- IFHS front panel includes a set of LEDs that indicate the radio’s status.
After you first plug in the power cable to the radio, the Power/Status LED should
be green, meaning that the radio has power. The RF Transmit and RF Receive
LEDs should blink.
LED Description
Power/Status This green LED indicates that the radio has power.
RF Transmit This yellow LED indicates RF transmission.
RF Receive This green LED indicates RF reception.
232 / 485 On (illuminated) for RS-232, Off for RS-485/422
Signal Strength If only one of these three LEDs is illuminated, then the radio is linked. If two
LEDs are illuminated, the radio’s signal strength is fair. If all three LEDs are
illuminated, the signal strength is good.
When a repeater or remote is not linked, the LEDs will illuminate one at a time
in a cycle from top to bottom. When the repeater or remote is linked, the
LEDs will illuminate from bottom to top, with a blinking LED meaning a
median signal strength between the lower LED and the blinking LED.