ProSoft Technology RLX-IFH24S-A - Manual (Page 49)

RLX-IFHS ♦ RadioLinx Industrial Wireless Guide to the RLX-IFHS User Manual
RadioLinx® Industrial Frequency Hopping Serial Radios User Manual
ProSoft Technology, Inc. Page 49 of 107
November 19, 2013
The following illustration shows the Serial Radio Parameters dialog AFTER
getting data
Click the Done button to close the Radio Parameters dialog box.
Generally, a radio is queried if there is a network failure (An error dialog box will
appear if there is no communication between the cabled radio and the
Configuration PC).
1.9.4 Query a Radio Remotely
A radio can be queried so that it reports its settings to the Configuration PC.
Radios may be queried remotely (through communication with the Master radio
cabled to the Configuration PC) or directly (through a cable connected to the
Configuration PC) so that it reports its settings to the Configuration PC (If
necessary, check the serial port settings to determine which COM port is
configured for the ControlScape FH network).
Revision information is available by querying radios through the Diagnostic
menu.
To remotely query a radio, cable (page 80) the Master radio to the Configuration
PC. From the ControlScape FH Setup/Application Main Menu, select:
 Diagnostic / Network
o the network, by name (as shown).