ProSoft Technology RLX-IFH24S-A - Manual (Page 52)

Guide to the RLX-IFHS User Manual RLX-IFHS ♦ RadioLinx Industrial Wireless
User Manual RadioLinx® Industrial Frequency Hopping Serial Radios
Page 52 of 107 ProSoft Technology, Inc.
November 19, 2013
2.1 Radio Hardware
The RLX-IFHS radio consists of the following components, as illustrated and
explained below:
One antenna port (page 53)
LEDs that indicate the status of the radio
Serial cable ports
Power connection (page 52)
2.1.1 Radio power requirements
The RLX-IFHS radio accepts voltages between 10 and 24 VDC, with an average
power draw of less than 6 watts. A detachable power connector comes with the
radio, as shown. The connector terminals are labeled + (positive DC connection)
and - (DC ground connection). You can use the provided AC-to-DC power supply
adapter that is pre-wired with a power connector, or you can use power from
another source, for example the power supply for the PLC or the networked
devices.
The DC power wires must be less than 3 m to meet regulatory requirements.
Label Connect to...
+ 10 to 24 VDC
— DC Ground