Yamaha CVP-705B - Manual (Page 23)

CVP-709/CVP-705 Reference Manual
23
Using Keyboard Harmony
1
Set the Keyboard Harmony function to “On.”
When this is set to “On,” Harmony or Echo is applied to your keyboard performance automatically.
2
Adjust related parameters such as Harmony type and volume.
NOTE The available parameters differ depending on the Harmony type.
Type Lets you select one of the Harmony types, which are divided into the following groups.
 Harmony Type (Standard Duet — Strum)
These types apply the harmony effect to notes played in the right-hand section of the
keyboard according to the chord specified in the left-hand section of the keyboard. (Note that
the “1+5” and “Octave” settings are not affected by the chord.)
If you want to use these types with the Style stopped, set the “Stop ACMP” parameter
(
page 78 ) to a setting other than “Disabled.”
When [ACMP ON/OFF] is turned on:
When the Left part is on:
When [ACMP ON/OFF] and
the Left part are on:
1
Split Point
Chord section for Style playback and Harmony effect
Split Point
Main and Layer Voices
Left Voice and chord section for Harmony effect
Style Split Point Left Split Point
Left Voice
Main and Layer Voices
Chord section for Style playback and Harmony effect