Roland Boutique JX-08 Synthesizer Module User Manual

Page 20

Advertising
background image

Selecting a Tone (Patch)

20

Using the Keyboard Split to Play Different Parts (SPLIT Mode)

In SPLIT mode, the keyboard is divided into two zones, and either PART A or PART B plays depending on which zone you play in.

All notes you play in the lower zone of the keyboard at or below the position on the keyboard that divides the zones (called the

“split point”) play PART A, and all notes played in the higher zone play PART B.

1.

Press the [SPLIT] button to make the indicator light.

SPLIT mode turns on.

Changing the position that divides the zones (split point)

You can change the split point on this unit.

1.

Press the [MENU] button.

The MENU screen appears.

2.

Use the [VALUE] knob to select “

KEY

,” and press the [VALUE] knob.

The KEY setting screen appears (

11.2. Keyboard Settings

(P.40)).

3.

Use the [VALUE] knob to select “

SPLt

,” and press the [VALUE] knob.

4.

Use the [VALUE] knob to select the split point (key).

When a K-25m is connected, you can hold down the [SPLIT] button and press a key to set the split point.

5.

To exit the settings, press the [MENU] button.

Advertising