Roland Boutique JX-08 Synthesizer Module - Manual (Page 51)

Effect Parameters
51
You can also press a step button to select the parameter items.
Reverse Dly
Step
buttons
Parameter Value Explanation
[1]
tyPe R.dLy
This is a reverse delay that adds a reversed and delayed sound to the
input sound. A tap delay is connected immediately after the reverse
delay.
[2]
Sľ Off , On
Turns the effects on/off.
[3]
Sync Off
,
On
When this is ON, the effect synchronizes with the tempo of the
rhythm.
“ 8.2.1. Tempo Settings (P.28)”
[4]
TiNE 1
–
2600 (ms) Adjusts the delay time from the direct sound until the delay sound is
heard.
[5]
notE
“ 12.1.18. About note
values (P.57)”
[6]
Fb
- 98
–
98 (%) Adjusts the proportion of the delay sound that is fed back into the
effect. (Negative values invert the phase.)
[7]
bAL
Volume balance between the effect sound and dry (original) sound
0
Effect sound : Dry sound = 0 : 100
100
Effect sound : Dry sound = 100 : 0
[8]
EQ.Lo -15
–
15 (dB) Amount of low range boost/cut
[9]
EQ.Hi -15
–
15 (dB) Amount of high range boost/cut
[10]
LEU 0
–
127
Output level
You can also press a step button to select the parameter items.
T-Scream
Step
buttons
Parameter Value Explanation
[1]
tyPe Od
This models the analog overdrive of the past. It adds a nice amount of overtones
without dirtying the sound.
[2]
Sľ Off ,
On
Turns the effects on/off.
[3]
diSt 0
–
127 Adjusts the amount of distortion.