Hensel Expert D 1000 Flash Kit - Manual (Page 12)

User Manual Expert D 500/1000
12 HENSEL-VISIT GmbH & Co. KG
5 Technical data
Unit series/unit type Expert D 500 Expert D 1000
Listed performance output: 500 J 1000 J
Lead aperture 100 ASA, t
1/60, 12“ reflector, 100%
output
1 m distance / 2 m distance :
1 m = 90 0/10
2 m = 45 0/10
1 m = 128 0/10
2 m = 64 0/10
Flash duration time (t 0,5 s) in
sec. up to: 1/5.600 s 1/3.250 s
Flash tube: code no. 9450420:
plug-in style, single coated
Minimal recharge time: 0.11 s 0.14 s
Recharge time at 100% perfor-
mance: 0.5 s 1.0 s
Flash performance adjust-
ment: 10-3 = 8 f-stops 10-3 = 8 f-stops
Modeling light: 300W/G6.35/115V or 300W/G6.35/230V
Modeling light adjustment: off / full / proportional / autored
Sync socket/ voltage: 6.3 mm jack plug, mono / 5 VDC
Fuses: F 4 A H, 5 x 20 mm
Input voltage: Multivoltage 110-240 V
Reflector connector: quick-change automatic for EH (10 cm)
Weight: ca. 3.4 kg ca. 3.9 kg
Overall dimensions in cm: LxWxH 35x13.1x19.7 LxWxH 38.5x13.1x19.7
Additional features: thermical check of performance electronics
- Daily flash counter, reset
function: yes
- Built-in fan: yes
- Slave, switchable: yes
- Flash check, switchable: yes
- Modeling light stand-by: autored
Technical modifications excepted.
The listed data are standard values which may deviate depending on component tolerances.