9 operation strobe wizard plus, Summary of control elements, Setting transmitter – Hensel Expert D 1000 Flash Kit User Manual
Page 24
User Manual Expert D 500/1000
24
HENSEL-VISIT GmbH & Co. KG
9 Operation Strobe Wizard Plus
The compact flash unit has a built-in radio receiver that can be
used for flash triggering.
This radio connection also allows you to remotely control the
modeling light.
Summary of control elements
Transmitter
F1
.....
Control key
q
(flash energy and modeling light options)
F2
.....
Control key
p
(flash energy)
F3
..... Fixing nut for mounting on hot shoe
F4
.....
Test flash trigger
F5
..... Channel selection switch
F6
.....
Mounting eye/locking screw for battery compartment
F7
.....
Socket for sync cord 2.5 mm
Setting transmitter
The transmitter does not have an ON switch. It is ready when
connected to the camera via the hot shoe or a sync cord.
Â
Attach the transmitter to the hot shoe of the camera and
secure it with the fixing nut
F3
.
- or -
Â
Depending on camera type, mount the transmitter to a flash
rail and connect the transmitter socket
F7
to the camera via
the included sync cord.
Transmitter and receiver can be synchronized via three different
channels. Up to three different work stations can be controlled
separately. Additionally, the transmitter can also control all
receivers together.
The setting is done via the
F5
key.
Radio triggering
Radio remote
control
Mounting trans-
mitter
Setting channel