Remote control – Hensel Expert D 1000 Flash Kit User Manual
Page 32
User Manual Expert D 500/1000
32
HENSEL-VISIT GmbH & Co. KG
Remote control
Setting power output
The keys
P5 +
and
P6 –
are used for adjusting the flash output
ENERGY
of the controlled flash unit. Briefly pressing the key ad
-
justs the power in steps of 0.1 f-stops, pressing the key longer
(> 2 s) adjusts the power in full f-stop steps.
Â
Press
P5 +
to increase the power
Â
Press
P6 –
to decrease the power
The generator’s LED display shows the set output values.
Flash head on/off
The controlled flash unit can be switched on and off via the
keys
P13
and
P14
.
Â
Press
P13
to switch off the flash heads assigned to the group
Standby on, a dot in the display lights up.
Â
Press
P14
to switch on the flash unit assigned to the group.
Setting the modeling light
The controlled flash heads’ modeling lights
Model
can be swit-
ched on and off on the generator via the keys
P8
and
P9
.
Â
Press
P8
to switch on the modeling light.
Â
Press
P9
to switch off the modeling light.