Hensel Expert D 1000 Flash Kit - Manual (Page 31)

User Manual Expert D 500/1000
31 HENSEL-VISIT GmbH & Co. KG
Setting group
The group setting lets you combine individual flash heads. This
allows you to jointly control the settings of the flash heads con -
tained in this group.
Triggering of the flash heads is done via the channel assign -
ment. Additionally, the transmitter can control all groups to -
gether (master mode).
The setting is done with the
P7 key.
 Press the group selection key P7 until the desired group is
shown in the LED bar.
- or -
 Press the MASTER key P10 to select all groups.
The complete LED bar lights up and all flash heads with the
same channel are controlled regardless of group assign-
ment.
The compact flash unit can be individually assigned to a group.
The selected group (letter A-F) is shown in display 5 .
How to change the flash channel’s group assignment:
 Press the RC key 18 for ca. 2 s or press the digital rotary
encoder 16 .
The display is now blinking.
 Set the desired group (A to F) by simultaneously pressing
and turning the digital rotary encoder 16 within 3 s.
After 5 s the display returns to its former setting and shows the
selected performance output.
Checking channel/group assignment
 Press the RC key 18 for ca. 2 s or press the digital rotary
encoder 16 .
The display 5 is now blinking and shows the channel and
the group.
Transmitter
Expert D
500/1000