Playback on a standard-definition tv – Canon PowerShot ELPH 360 HS Digital Camera (Silver) User Manual
Page 124
124
Before Use
Basic Guide
Advanced Guide
Accessories
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Appendix
Index
Playback on a Standard-Definition TV
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV
as you control the camera.
1
Make sure the camera and TV are off.
2
Connect the camera to the TV.
●
On the TV, insert the cable plugs fully into
the video inputs as shown.
●
On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
3
Display images.
●
Follow steps 3 – 4 in “Playback on a
High-Definition TV” (
images.
●
Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the [
] button and choose
[Video System] on the [ ] tab. (For Japan, choose [NTSC].)
●
When the camera and TV are connected, you can also shoot
while previewing shots on the larger screen of the TV. To shoot,
follow the same steps as when using the camera screen.
However, AF-Point Zoom (
Black or white
Yellow
Yellow
Black
●
On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
3
Turn the TV on and switch to
external input.
●
Switch the TV input to the external input
you connected the cable to in step 2.
4
Turn the camera on.
●
Press the [
] button to turn the camera
on.
●
Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
●
When finished, turn off the camera and
TV before disconnecting the cable.
●
Camera operating sounds are not played while the camera is
connected to an HDTV.