Canon PowerShot ELPH 360 HS Digital Camera (Silver) - Manual (Page 96)

96
Before Use
Basic Guide
Advanced Guide
Wi-Fi Functions
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
● If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
3
Choose [ ].
● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
4
Choose [Add a Device].
● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
5
Choose [WPS Connection].
● Press the [ ][ ] buttons to choose
[WPS Connection], and then press the
[ ] button.
6
Choose [PBC Method].
● Press the [ ][ ] buttons to choose [PBC
Method], and then press the [ ] button.
● For information on WPS compatibility and for instructions on
checking settings, refer to the access point user manual.
● A router is a device that creates a network (LAN) structure for
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
● This guide refers to all Wi-Fi routers and base stations as “access
points”.
● If you use MAC address filtering on your Wi-Fi network, be sure
to add the camera’s MAC address to your access point. You can
check your camera’s MAC address by choosing MENU (
= 25)
► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Check
MAC Address].
Using WPS-Compatible Access Points
WPS makes it easy to complete settings when connecting devices over
Wi-Fi. You can use either Push Button Configuration Method or PIN
Method for settings on a WPS supported device.
1
Confirm that the computer is
connected to an access point.
● For instructions on checking the
connection, refer to the device and
access point user manuals.
2
Access the Wi-Fi menu.
● Press the [ ] button.