Canon PowerShot ELPH 360 HS Digital Camera (Silver) - Manual (Page 18)

18
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Changing the Date and Time
Adjust the date and time as follows.
1
Access the menu screen.
● Press the [ ] button.
2
Choose [Date/Time].
● Move the zoom lever to choose the [ ]
tab.
● Press the [ ][ ] buttons to choose
[Date/Time], and then press the [ ]
button.
3
Change the date and time.
● Follow step 2 in “Setting the Date and
Time” ( = 17) to adjust the settings.
● Press the [ ] button to close the
menu screen.
● Date/time settings can be retained for about 3 weeks by the
camera’s built-in date/time battery (backup battery) after the
battery pack is removed.
● The date/time battery will be charged in about 4 hours once you
insert a charged battery pack, even if the camera is left off.
● Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on. Set the correct date
and time as described in “Setting the Date and Time” (
= 17).
3
Specify your home time zone.
● Press the [ ][ ] buttons to choose your
home time zone.
4
Finish the setup process.
● Press the [ ] button when finished.
After a confirmation message, the setting
screen is no longer displayed.
● To turn off the camera, press the power
button.
● Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
● To set daylight saving time (1 hour ahead), choose [ ] in step 2
and then choose [ ] by pressing the [ ][ ] buttons.