High-speed continuous shooting (high-speed burst), Shooting long exposures (long shutter) – Canon PowerShot ELPH 360 HS Digital Camera (Silver) User Manual
Page 52
52
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
●
If the flash fires, your shot may be overexposed. In this case, set
the flash to [ ] and shoot again (
High-Speed Continuous Shooting
(High-Speed Burst)
Still Images
Movies
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed,
1
Choose [ ].
●
Follow steps 1 – 2 in “Specific Scenes”
2
Shoot.
●
Hold the shutter button all the way down
to shoot continuously.
●
Recording pixel setting is [ ] (2592 x 1944) and cannot be
changed.
●
Focus, image brightness, and color are determined by the first
shot.
●
Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
●
As more shots are taken, shooting may slow down.
Shooting Long Exposures (Long Shutter)
Still Images
Movies
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1
Choose [ ].
●
Follow steps 1 – 2 in “Specific Scenes”
2
Choose the shutter speed.
●
Press the [ ] button, choose [ ] in the
menu, and choose the desired shutter
3
Check the exposure.
●
Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4
Shoot.
●
On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
●
With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
●
Set [IS Mode] to [Off] when using a tripod or other means to
secure the camera (